Injection molding machine
CONTACT US
咨询热线 TEL:

+86-512-58550068

MOBILE:+86-15150250830

EMAIL:info@reliable-machine.com

RXF-65

返回列表SOURCE:Reliable DATE 2016-10-31 CLICK:








 
Standard equipment:
1) Double cylinder balancing injections
2) High-torque oil-motor preplasticizing
3) Five pivots minus relief angle, double toggles, machine hinge
mold locking
4) Cabinet-type holder integrates the mold plate
5) Oil motor driven gear mold adjusting
6) Storage-type grease lubricating
7) Pressure and flow whole-proportion running
8) High-performance, low-noise oil pump
9) Multi-step pressure and speed adjusting
10) High-precision position linear transducer
11) Digital memory for mold group
Injection unit:
1) Four injection pressures and speeds with three additional pressures and speeds
2) Suck back function
3) Cold start protection
4) Pre-suck back function
5) Linear displacement transducer accurately monitor injection position, providing optimum. injection accuracy and control
6) Temperature control
7) Heating Status indication
Clamping unit:
1) Three clamp close and open pressures and speeds
2) Mold protection function
3) Hydraulic ejector stroke controlled by transducer
4) Automatic hydraulic die-height adjustment driven by planetary gears system
5) Adjustable support under moving platen
6) Automatic high pressure toggle lubrication with low oil level alarm
7) Mechanical, electrical and hydraulic safety interlock devices
8) Linear displacement transducer controls clamping position
Other parts:
1) Independent core in / out pressure and speed
2) Hydraulic unscrewing sequence
3) Hydraulic oil high temperature alarm
4) System pressure gauge
5) Shot counter and reset function
6) Malfunction alarm light
7) Self-diagnostic function
8) Emergency stop buttons placed both front and rear of the machine to provide easy access
 


 
Specifications RXF-65
A B C D
Injection Unit
 Screw Diameter mm 28 32 35 38
 Screw L/D ratio L/D 24.3 21.3 19.5 18
Injection capacity in theory cm3 73 96 115 136
Injection weight(PS) g 67 87 105 123
oz 2.3 3 3.7 4.3
 Injection pressure Mpa 229 175 146 123
 Injection rate g/s 40 55 66 74
 Plasticizing capacity g/s 6 8 10 12
 Screw speed rpm 190
Clamping Unit
 Clamping force KN 650
 Moving mould-plate stroke mm 270
 Max. mould height mm 300
 Min. mould height mm 100
 Space between tie-bars mm 310*290
Hydraulic ejector force KN 27.5
 Hydraulic ejector stroke mm 65
 Ejector number n 1
 Other
 Pump pressure Mpa 16
Motor/Driving power KW 7.5/11
 Heating capacity KW 7.4
 Machine dimension M 3.53*1.1*1.7
 Machine weight T 1.9
 Oil tank capacity L 117