Injection molding machine
CONTACT US
咨询热线 TEL:

+86-512-58550068

MOBILE:+86-15150250830

EMAIL:info@reliable-machine.com

RXF-158

返回列表SOURCE:Reliable DATE 2016-10-31 CLICK:









Standard equipment:
1) Double cylinder balancing injections
2) High-torque oil-motor preplasticizing
3) Five pivots minus relief angle, double toggles, machine hinge
mold locking
4) Cabinet-type holder integrates the mold plate
5) Oil motor driven gear mold adjusting
6) Storage-type grease lubricating
7) Pressure and flow whole-proportion running
8) High-performance, low-noise oil pump
9) Multi-step pressure and speed adjusting
10) High-precision position linear transducer
11) Digital memory for mold group
Injection unit:
1) Four injection pressures and speeds with three additional pressures and speeds
2) Suck back function
3) Cold start protection
4) Pre-suck back function
5) Linear displacement transducer accurately monitor injection position, providing optimum. injection accuracy and control
6) Temperature control
7) Heating Status indication
Clamping unit:
1) Three clamp close and open pressures and speeds
2) Mold protection function
3) Hydraulic ejector stroke controlled by transducer
4) Automatic hydraulic die-height adjustment driven by planetary gears system
5) Adjustable support under moving platen
6) Automatic high pressure toggle lubrication with low oil level alarm
7) Mechanical, electrical and hydraulic safety interlock devices
8) Linear displacement transducer controls clamping position
Other parts:
1) Independent core in / out pressure and speed
2) Hydraulic unscrewing sequence
3) Hydraulic oil high temperature alarm
4) System pressure gauge
5) Shot counter and reset function
6) Malfunction alarm light
7) Self-diagnostic function
8) Emergency stop buttons placed both front and rear of the machine to provide easy access
 




Specifications RXF-158
  A B C D
 Injection Unit
 Screw Diameter mm 38 42 45 48
 Screw L/D ratio L/D 24.3 22 20.5 19.2
Injection capacity in theory cm3 226 277 318 361
 Injection weight(PS) g 206 252 289 328
  oz 7.2 8.8 10.1 11.5
 Injection pressure Mpa 248 203 177 155
 Injection rate g/s 100 126 144 163
 Plasticizing capacity g/s 13 15 20 24
 Screw speed rpm 200
Clamping Unit
 Clamping force KN 1580
 Moving mould-plate stroke mm 400
 Max. mould height mm 500
 Min. mould height mm 150
 Space between tie-bars mm 460*410
Hydraulic ejector force KN 53
 Hydraulic ejector stroke mm 130
 Ejector number n 5
 Other
 Pump pressure Mpa 16
Motor/Driving power KW 15/18.5
 Heating capacity KW 10.95
 Machine dimension M 5.0*1.32*1.93
 Machine weight T 4.3
 Oil tank capacity L 253