Injection molding machine
CONTACT US
咨询热线 TEL:

+86-512-58550068

MOBILE:+86-15150250830

EMAIL:info@reliable-machine.com

RXF-98

返回列表SOURCE:未知 DATE 2016-10-31 CLICK:








Standard equipment:
1) Double cylinder balancing injections
2) High-torque oil-motor preplasticizing
3) Five pivots minus relief angle, double toggles, machine hinge
mold locking
4) Cabinet-type holder integrates the mold plate
5) Oil motor driven gear mold adjusting
6) Storage-type grease lubricating
7) Pressure and flow whole-proportion running
8) High-performance, low-noise oil pump
9) Multi-step pressure and speed adjusting
10) High-precision position linear transducer
11) Digital memory for mold group
Injection unit:
1) Four injection pressures and speeds with three additional pressures and speeds
2) Suck back function
3) Cold start protection
4) Pre-suck back function
5) Linear displacement transducer accurately monitor injection position, providing optimum. injection accuracy and control
6) Temperature control
7) Heating Status indication
Clamping unit:
1) Three clamp close and open pressures and speeds
2) Mold protection function
3) Hydraulic ejector stroke controlled by transducer
4) Automatic hydraulic die-height adjustment driven by planetary gears system
5) Adjustable support under moving platen
6) Automatic high pressure toggle lubrication with low oil level alarm
7) Mechanical, electrical and hydraulic safety interlock devices
8) Linear displacement transducer controls clamping position
Other parts:
1) Independent core in / out pressure and speed
2) Hydraulic unscrewing sequence
3) Hydraulic oil high temperature alarm
4) System pressure gauge
5) Shot counter and reset function
6) Malfunction alarm light
7) Self-diagnostic function
8) Emergency stop buttons placed both front and rear of the machine to provide easy access
 




Specifications RXF-98
  A B C D
 Injection Unit
 Screw Diameter mm 32 35 38 40
 Screw L/D ratio L/D 24 22 20.2 19.2
Injection capacity in theory cm3 128 154 181 200
 Injection weight(PS) g 116 140 164 182
  oz 4 4.9 5.7 6.4
 Injection pressure Mpa 262 219 185 168
 Injection rate g/s 71 85 101 111
 Plasticizing capacity g/s 10 11 13 17
 Screw speed rpm 200
Clamping Unit
 Clamping force KN 980
 Moving mould-plate stroke mm 315
 Max. mould height mm 390
 Min. mould height mm 150
 Space between tie-bars mm 360*340
Hydraulic ejector force KN 45
 Hydraulic ejector stroke mm 100
 Ejector number n 5
 Other
 Pump pressure Mpa 16
Motor/Driving power KW 11/11
 Heating capacity KW 8.2
 Machine dimension M 4.16*1.19*1.76
 Machine weight T 2.7
 Oil tank capacity L 203